Poses

Get early access to build and test build, be able to try all epochs and test them by yourself on Patreon or contact me for support on Discord

To support me you can buy me a coffe at https://ko-fi.com/antonioriolo

Install Instructions:

open stable diffusion -> extensions -> install from URL -> https://github.com/Mikubill/sd-webui-controlnet.git

click Apply and restart UI

Then download from https://huggingface.co/webui/ControlNet-modules-safetensors/tree/main the file control_openpose-fp16.safetensor

place it inside extensions/sd-webui-controlnet/models

After all of this, you will have a ControlNet v1.1.112 just above Script in txt2image tab

Open it, place the pose you want to replicate by selecting it from your computer and place it in the image selection square box. You can also drag and drop.

Select preprocessor NONE, check Enable Checkbox, select control_openpose-fp16 in Model list, check Controlnet is more important in Control Mode.

Then generate your image, don't forget to write a proper prompt for the image.

I posted the pose images and 1 example generated image with that pose on next to it using the same prompt for all of them and my models betterCuteAsian and Luxury Dress. But you can modify the prompt to fit what you want.

Enjoy!

If you'd like to support my efforts and have access to early and bleeding edge builds, please think about joining my Patreon: https://www.patreon.com/betterCuteAsians

Get early access to build and test build, be able to try all epochs and test them by yourself on Patreon or contact me for support on Discord

To support me you can buy me a coffe at https://ko-fi.com/antonioriolo

Install Instructions:

open stable diffusion -> extensions -> install from URL -> https://github.com/Mikubill/sd-webui-controlnet.git

click Apply and restart UI

Then download from https://huggingface.co/webui/ControlNet-modules-safetensors/tree/main the file control_openpose-fp16.safetensor

place it inside extensions/sd-webui-controlnet/models

After all of this, you will have a ControlNet v1.1.112 just above Script in txt2image tab

Open it, place the pose you want to replicate by selecting it from your computer and place it in the image selection square box. You can also drag and drop.

Select preprocessor NONE, check Enable Checkbox, select control_openpose-fp16 in Model list, check Controlnet is more important in Control Mode.

Then generate your image, don't forget to write a proper prompt for the image.

I posted the pose images and 1 example generated image with that pose on next to it using the same prompt for all of them and my model betterCuteAsian. But you can modify the prompt to fit what you want.

Enjoy!

If you'd like to support my efforts and have access to early and bleeding edge builds, please think about joining my Patreon: https://www.patreon.com/betterCuteAsians